• <blockquote id="2ma84"></blockquote>
    <bdo id="2ma84"><small id="2ma84"></small></bdo>
    <xmp id="2ma84">
  • <wbr id="2ma84"><blockquote id="2ma84"></blockquote></wbr>
  • vat真空閥門

    產品分類

    聯系我們

    昆山熙日機械設備有限公司

    聯系人: 張小姐

    手機:(0)13913143077

    聯系人:李先生

    手機:(0)15895662155

    郵箱:kssunnyjx@126.com

    QQ:1191890920

    微信:kssunnyjx

    網址:www.leybold-inficon.com

    www.juegosdelossimpson2.com

    辦公地址:江蘇省昆山市長江南路77號

    維修地址:江蘇省昆山市花橋鎮星光工業園2A


    VGC031 ATM to Medium Vacuum Passive Gauge Controller

    您的當前位置: 首 頁 >> 產品中心 >> 控制器和電源單元

    VGC031 ATM to Medium Vacuum Passive Gauge Controller

    • 所屬分類:控制器和電源單元

    • 點擊次數:
    • 發布日期:2018/01/04
    • 在線詢價
    詳細介紹

    VGC031 ATM to Medium Vacuum Passive Gauge Controller

    The INFICON Vacuum Gauge Controller 031 (VGC031) is designed for use in conjunction with the INFICON Pirani Gauge Enhanced 050 (PGE050) and acts as a convenient power supply, control and readout. VGC031 and PGE050 are a flexible combination to monitor your vacuum system in the range from 1.3 × 10-4 up to 1333 mbar (1 × 10-4 up to 1000 Torr). The VGC031 with its space saving panel mount housing supports a variety of technical features as 2 set point relays, 4 user selectable analog outputs and offers additionally RS232/ RS485 digital interfaces. The bright, sharp and clear OLED display with the integrated keypad user Interface rounds out this user friendly vacuum gauge controller package. The rugged industrial design makes the VGC031 in combination with the convection enhanced PGE050 gauge sensor a very good choice for many vacuum applications were economical vacuum measurement from low to high vacuum range is required.

    VGC031_Product.png

    益處

    • Displays and controls wide measurement range from 1.3 × 10-4 up to 1333 mbar (1 × 10-4 up to 1000 Torr)

    • Bright digital OLED display with keypad for simple set up and operation

    • 4 user selectable analog output signals

    • 2 set point relays

    • RS232/ RS485 digital interface

    • Space saving design – 1/8-DIN panel mount housing for rack mount installation or as stand alone unit

    • Powered through user supplied 12 to 28 V (dc) or by INFICON's VGC031 Power Supply

    • Compliance & standards: CE, RoHS

    • VGC031 controller and PGE050 convection enhanced vacuum gauge sensor and cable can direct drop in replace Granville-Phillips? 375 and 475 controllers and 275 Convectron? gauge sensors and gauge cable (Remote interface, relay and power connectors are different)

      (Granville-Phillips? and Convectron? are registered trademarks of MKS Instruments, Andover, MA)

    功能

      典型應用

      • Fore vacuum pressure measurement

      • General vacuum measurement and control form low to the high vacuum range

      • VGC031 Dimensional Drawing.PNG

      規格

      類型VGC031
      Measurement channels
      1
      Display
      OLED
      Display update rate1/s0.5 s
      Connectable gauge with display range
      PGE050 (see Data Sheet)1.3 x 10-4 … 1333
      Measurement unit (selectable)
      mbar, Torr, Pa
      Temperature
      Operation (ambiance)°C0 ... +40
      Storage°C-40 ... +70
      Supply voltageV (dc)+12 ... +28
      Analog OutputV (dc)0 ... 7 or 1 ... 8 (log-linear, 1 V/decade)
      0 ... 10 (linear)
      0.375 ... 5.659 (non-linear S-curve)
      0 ... 9 (non-linear S-curve)
      Setpoint relay
      2 (single-pole double-throw relays (SPDT)), 1 A at 30 V (dc) resistive, or V (ac) non-inductive
      Connector
      gauge
      9-pin D-Sub female
      analog output, serial interface
      9-pin D-Sub male
      relay outputs
      6-pin pluggable terminal block
      power
      2-pin pluggable terminal block
      Interface (digital)
      RS232, RS485
      Housing
      1/8-DIN panel-mount enclosure (aluminium extrusion)
      Weight250

      零件號

      VGC031 Ordering Information.PNG


      相關標簽:?????控制器和電源單元,VGC031ATMtoMediumVacuumPassiveGaugeController價格,VGC031ATMtoMediumVacuumPassiveGaugeController批發

      Z近瀏覽:

      在線客服
      分享 一鍵分享